Carli Suspension
'14-24 Ram 2500 Carli 2.5 Pintop Suspension System - 3" Lift
Sway Bar Options
Rear Coil Option
'14-24 Ram 2500 Carli 2.5 Pintop Suspension System - 3" Lift
Sway Bar Drop (CS-DSBD-14) / R1 coils: 0.5″-1″ lift reduced capacity soft-ride coils
MCQUEEN
190 South McQueen Road
Suite 109
Gilbert AZ 85233
United States
THE KIT THAT SHOULD'VE COME INSTALLED FROM THE FACTORY
The Carli Pintop for the 2014-2024 Ram 2500 is the Backcountry on steroids, take the description for the Backcountry and throw an exponent on it. This system is our Jack-of-all-trades system from which every Ram owner would benefit. Raising the Ram platform then adding the 2.5” diameter shocks will support the argument that these trucks should come equipped with 2.5” shocks from the factory. This system is our most popular, all around suspension system. It was tuned and rides best with 18” wheels and 37” tires.
SPECS:
- Front Lift: 3.25"
- Rear Lift: 1"
- Front Travel: 9.3"
- Rear Travel: 11"
- Shock Diameter: 2.5
- Tire Fitment: 37"x12.50
BASE KIT INCLUDES:
- CS-DEL-R-14: Rear Sway Bar End Links
- CS-DFBD-1: Front Bump Drops
- CS-DLRC-14-D: Front Linear-Rate Coil Springs
-
CS-DMRC-14-R: Rear Multi-Rate Coil Springs
-
- Option 1, R1 coils: 0.5″-1″ lift, reduced capacity soft-ride coils – Max 1,500lb. bed load
- Option 2, R2 coils: 2”-3” lift. These coils maintain the factory payload.
- CS-DATB-1419: Adjustable Track Bar with Stabilizer Bracket
- CS-DRAD-14: Radius Arm Drops
- CS-DCM-20-HK: Transmission Crossmember, Extended Hardware Kit
- CS-DRBD-AL: Rear Bump Drops
- CS-DPRBDROP-14-R: Rear Track Bar Drop
- CS-DPT25SPKG-14-D: Carli Tuned King 2.5" Remote Reservoir Pintop Shock Package with Reservoir Mounts, Stainless Shafts, Brake Line Tabs
- Option 1, R1 coils: 0.5″-1″ lift, reduced capacity soft-ride coils – Max 1,500lb. bed load
-
SWAY BAR OPTIONS:
-
SWAY BAR DROPS, CS-DSBD-14
-
- In-house machined billet aluminum
- Hard-Anodized for corrosion resistance
- Correct factory sway bar geometry on 3" Lift
-
-
TORSION SWAY BAR, CS-DTSB3-1419
-
- Easily the best "bang for the buck" upgrade for ride quality
- Allows front suspension to move freely without giving up control
- Requires removal of the electronic sway bar on Power Wagons
-
KIT DETAILS:
The Details: This system boasts Carli-specific, blueprinted, King 2.5” shocks on all four corners. In an effort to provide customers with the best product, we designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy-duty truck platform; we then tuned the shocks around the custom pistons based on the only thing that matters to us, seat-of-the-pants feel. We round off ALL our King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather is far less likely to hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts.
Your truck will sit 3”-3.5” higher in the front (cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear is lifted .5”-1.5” via Carli’s progressive coil springs and will reduce payload and towing capacity 15% from a stock 2500.
WHEEL AND TIRE:
This system will fit up to a 37” tire when utilizing wheels that are no more than 9” wide with 5.75-6” of backspacing. A 12.5” wide should fit with no rubbing on the factory radius arm and only minor trimming required, while a 13.5” will require more trimming and slightly more offset to fit properly. 35” tires will fit with VERY minimal if any trimming. We Recommend running an 18” diameter wheel for optimal ride quality (more rubber = better small bump compliance) on a 35”-37” E-rated tire running 45psi front, 40psi rear when unloaded.
American-made Excellence
SDHQ: Built for Adventure
Experience American-made excellence from SDHQ, your fellow off-road enthusiasts. We take pride in crafting high-quality, custom products right at our headquarters for unparalleled performance and durability.
Check out what 'SDHQ Built' means for us as well as our customers: