PowerTank
10 LB Power Tank Package A
10 LB Power Tank Package A
Gloss Black
MCQUEEN
190 South McQueen Road
Suite 109
Gilbert AZ 85233
United States
PT10-5240-The 10 lb Package A Power Tank is a great entry-level Power Tank system. It is the perfect Power Tank size for trail rigs with up to 35 inch tires and includes a mounting bracket and everything you need to air up tires or run air tools.
A Power Tank is the fastest and most powerful portable air solution. With the power of CO2 you can air up faster, reseat bigger tires (tested up to 46 in) safely, and run air tools at full power. To see what Power Tank performance looks like for your tire size, check out our tire air up chart. Based on tire size and amount of air you are adding, it will tell you how many tires you can fill on one tank and how quickly you can do it. As an example, you can air up from 15 psi to 25 psi on a 35 inch tire in 19 seconds and you can air up 30 tires before needing to refill your 10 lb Power Tank! The same size tank can also remove 360 lug nuts at 90 ft/lbs from a 1/2 in impact wrench before empty.
OPTION DETAILS:
REGULAR OPTIONS:
You have a choice between a high pressure HP250i regulator with 250 psi max output or an extreme pressure XP400 regulator with 400 psi max output. Which one is right for you depends on what you will be using your Power Tank for.
Tire air up speed is determined primarily by flow rate or the cubic feet per minute (CFM) of the gas. The HP250i boasts a 45 cfm flow rate and the XP400 outputs 48 cfm. Not a large difference in tire air up speed between the two. A high-end compressor puts out 5-6 cfm for comparison.
HOSE OPTIONS:
30 ft coiled hose will stretch from where your Power Tank is mounted in the back to the furthest corner of your Four Door Wrangler Unlimited. It is much faster to put away than the straight hose.
30 ft straight hose will reach a bit further without worrying about the coils catching on corners of your vehicle. It is also the preferred hose to use when working with air tools as it does not pull your tools away from you like a coiled hose would. The downside is the extra time it will take you to coil back up when you're done using it.
10 ft hose: Depending on how you use your Power Tank, a 10 ft hose may be the best option. For longer vehicles like full-size pickups or RVs or set ups where you need to remove the Power Tank from its mount before use, the 10 ft hose is the least obtrusive of the three. Pair it with a Safety Series Tire Inflator with an extended hose whip to make airing up a cinch.
COUPLER OPTIONS:
Our standard Power Flow 3 Coupler is one of the nicest air tool couplers on the market. While most use 3 or 4 ball bearings to lock your tool, ours uses 8 balls for extra security under high pressures. Full aluminum construction with machined heat fins for better thermal transfer. It fits 1/4" industrial male plugs.
BRACKET OPTIONS:
The Super Bracket included in all Power Tank Packages is the best way to hard mount your Power Tank. It features a full stainless steel construction with a lockable latch and rubber trim to protect your Power Tank's finish. Super Brackets are available in raw stainless steel or a satin black powdercoat. The Super Bracket works with all Power Tank 'Piggy-Back' secondary brackets like our vehicle specific Wrangler mounts or Billet Roll Bar Clamps.
WHAT'S INCLUDED:
- Super Flow Regulator
- Power Grip Guard Handle
- 10 lb Armorcoat CO2 Cylinder
- Tank Boot
- Super Flex Hose
- Power Flow 3 Coupler
- 10 lb/15 lb Super Bracket
- Push-On Air Chuck
American-made Excellence
SDHQ: Built for Adventure
Experience American-made excellence from SDHQ, your fellow off-road enthusiasts. We take pride in crafting high-quality, custom products right at our headquarters for unparalleled performance and durability.
Check out what 'SDHQ Built' means for us as well as our customers: