Camburg Engineering

'10-Current Lexus GX460 Camburg Race Series Long Travel Kit

  • VENDOR: Camburg Engineering
  • PART#: CAM-310049
  • YOUR PRICE: Regular price $3,895.00

PRODUCT OVERVIEW:

Camburg's long travel kit for the 2010-Current Lexus GX460 is designed for the ultimate off-road performance.

In this high end Camburg Long Travel kit you will find nothing but the very best in A-Arm performance. Starting with Camburg's lower arm, uni-balls in the lower frame pivots, uni-ball lower ball joint replacement, and a stout boxed race arm. The upper arm pivots on urethane bushings with zerk fitting and 1.250″ race uni-balls replace the stock ball joints. Camburg adapted the uni-ball to the spindle with heat treated stainless steel adapters. Utilizing Camburg SPEC 8″ travel 2.5″ reservoir coilovers by FOX or King there is no need to cut the stock coil-over mounts. The shock design has an external top cap so the shock has a 1.5″ shorter overall extend length then all other off-road race shocks.

This system will yield up to 15″ travel on a 2×4 and 14″ on a 4×4. This system can also be upgraded with Camburg's dual shock mount and a 2.5″ 3 tube by-pass shock can be added to the system. So to sum it up this upper and lower uni-ball Long Travel System is for the ultimate in performance so if you are into trail running or desert racing or just exploring Moab you have found the ultimate in performance!

SPECS:

  • LIFT: 2.5-4 in (front)
  • TRACK WIDTH: +3.5 in per side
  • WHEEL TRAVEL: 13-14 in.
  • WHEEL SIZE: 16-17 in.
  • MAX BACKSPACING: 4.75 in
  • TIRE SIZE: 285/75/16 or 285/70/17

WHAT'S INCLUDED:

  • Upper Uni-ball A-arms
  • Lower Uni-ball A-arms
  • Lower Uni-ball Spindle Adapter
  • Brake Lines
  • Limit Straps
  • Steering Extensions
  • Coilover Mounts
  • Hardware

TECH INFO:

  • 2wd models are able to run a coilover, bypass shock and air bump stop
  • 4wd models can run a coilover and air bump stop or coilover and bypass shock, not all 3 like the 2wd models
  • Fits non KDSS equipped models only
  • Fiberglass front fenders need to be installed in conjunction with this suspension system. While this kit is able to be 95% bolt-on, Camburg recommends having it installed by a reputable off-road shop familiar with these types of products and components.