INSTALL INSTRUCTIONS

PRODUCT OVERVIEW:

Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top tent. Simply release the tabs on the 4 latches and lift the tent away in seconds.

No more wrenching in tight spaces during the off-season or time consuming weekday removal of a roof top tent.
This strong and rattle free mounting system is built off-road tough for use with Front Runner Racks.
Works with hard shell tents such as Autohome/Maggionlina, and James Baroud. Hard shell tent owners please read *IMPORTANT NOTE below.
4 low profile base brackets are bolted to a Front Runner Rack while 4 self- aligning bushes are secured to the tent base channels using the supplied plates.
Two of the latches securely lock with a key while the other 2 latching brackets feature a safety catch.
Comes with 4 keys for locking brackets.
Tents can be mounted at two different heights, depending on clearance needs. The bottom of the tent can sit either 40mm / 1.57 inches or 17mm / 1 inch above the rack slats.
- Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack.
The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available
No tent modification required.
Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes.
Supplied with all required mounting hardware and a special installation tool.
Fitting instructions are included.

*IMPORTANT NOTE: Hardshell tents need additional support. If you are using these brackets with hard shell tents, such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles.

HI-Lift Jack Bracket