'08-Current Toyota Sequoia King 2.5 RR EXT Travel Coilovers & Rear Shocks w/ Adjusters
'08-Current Toyota Sequoia King 2.5 RR EXT Travel Coilovers & Rear Shocks w/ Adjusters
'08-Current Toyota Sequoia King 2.5 RR EXT Travel Coilovers & Rear Shocks w/ Adjusters
'08-Current Toyota Sequoia King 2.5 RR EXT Travel Coilovers & Rear Shocks w/ Adjusters
'08-Current Toyota Sequoia King 2.5 RR EXT Travel Coilovers & Rear Shocks w/ Adjusters
'08-Current Toyota Sequoia King 2.5 RR EXT Travel Coilovers & Rear Shocks w/ Adjusters
'08-Current Toyota Sequoia King 2.5 RR EXT Travel Coilovers & Rear Shocks w/ Adjusters

King Off-Road Shocks

'08-22 Toyota Sequoia King 2.5 RR EXT Travel Coilovers & Rear Shocks w/ Adjusters & Upper Control Arms

$3,679.35
SKU: 25001-143A-EXT +25001-200A
Upper Control Arm Selection:

Upper Control Arm Selection
Quantity:

'08-22 Toyota Sequoia King 2.5 RR EXT Travel Coilovers & Rear Shocks w/ Adjusters & Upper Control Arms

None

MCQUEEN

190 South McQueen Road
Suite 109
Gilbert AZ 85233
United States

+14806332929

STATE OF CALIFORNIA CONSUMER WARNING

This suspension combo kit for the 2008-2022 Toyota Sequoia includes everything you need to lift your Toyota Sequoia. This kit comes with King's 2.5 Remote Reservoir Front and Rear Coilovers with Adjusters.

Both coilovers and rear shocks comes with King's compression adjusters allowing for optimal situational tunning and adjustment.

This kit also allows you to select what upper control arms you want to use to maintain OEM alignment specs and increase ground clearance.

FITMENT DETAILS:
  • VEHICLE FITMENT: 2008-2022 Toyota Sequoia
  • Use of an aftermarket upper control arm is required to maintain proper alignment specs
SPECS:
  • Front Lift: 0-3" Front Lift
  • Rear Lift: 0-1.5" Rear Lift
WHAT'S INCLUDED:
  • QTY 2. '08-22 Toyota Sequoia King 2.5 RR EXT Travel Coilovers w/ Adjusters-25001-143A-EXT
  • QTY 2. '08-22 Toyota Sequoia King 2.5 RR Rear Shocks w/ Adjusters-25001-200A
  • Your selection of Total Chaos Fabrication, Camburg, Icon Billet, or Icon Tubular upper control arms (required for purchase)
UPPER CONTROL ARM OPTIONS:

Total Chaos Fabrication '08-Current Toyota Sequoia Upper Control Arms With Heims

Designed for the 2008-2022 Toyota Sequoia Total Chaos upper control arms combined with extended length coil over shocks will allow for up to 2" of additional wheel travel.

KEY FEATURES:
  • TC includes 3/4" chromoly heim joints for the pivots.
  • Heim upper control arms are fully adjustable to allow maximum tuning of caster and camber. Shipped preset to O.E. location.
  • Designed for vehicles with a 6" or higher drop bracket lift kit.

Icon Vehicle Dynamics '08-22 Toyota Sequoia Delta Joint Billet Upper Control Arm Kit

ICON Vehicle Dynamics has developed an on vehicle adjustable billet aluminum upper control arm system for the 2008-2022 Toyota Sequoia platform. These trucks were designed and built for on or off-road use, but have plenty of room for improvement like any factory vehicle.

KEY FEATURES:
  • 6061 Billet Aluminum
  • Precision CNC Machined
  • 1 PTFE Lined all Stainless Uniballs
  • Easily Adjustable on the Vehicle for Perfect Wheel Alignments
  • 17-4 High Grade Stainless Steel Uni-ball Adapter Pin
  • High Precision CNC Machined Pin Provides OEM Like Fitment
  • Forged PTFE Lined 3/4 Rod Ends
  • O-ring sealed uniball cover cap
  • Made in the USA

'08-22 Toyota Sequoia ICON Delta Joint Tubular Upper Control Arm Kit

Take the performance of your 2008-2022 Toyota Sequoia to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance.

KEY FEATURES:
  • ICON Delta Joint
  • 1026 DOM Steel Construction
  • CNC Bent Tubing
  • Serviceable Dual Stage Bushings
  • CNC Machined Bushing Housings and Sleeves
  • Built-In Caster Correction
  • Black Semi-Gloss Powder Coat Finish
TECH INFO:
  • Factory Wheels & Tires Fitment: Yes
  • Recommended Aftermarket Wheels: 17" x 8.5" with max 5.75" back space
  • Recommended Aftermarket Tires: 35" x 12.50"

'08-22 Toyota Sequoia Camburg Kinetik Billet Upper Control Arms

Camburg Engineering's KINETIK Series billet upper control arms for the 2008-Current Toyota Sequoia are designed to increase your usable wheel travel.

KEY FEATURES:
  • Increases usable wheel travel
  • Corrects camber and caster
  • Eliminates weak factory ball-joints
  • CNC machined 6061 billet aluminum
  • CAD/CAM engineered
  • FK 7/8″ heim joints for adjustable camber and caster
  • FK 1.50″ PTFE-lined uniballs pre-installed
  • Anodized and laser etched
  • All necessary hardware included and ready to install
  • Made in the USA
  • Designed for 1-3″ of lift
SPECS:
  • Track Width: Stock
  • Wheel Size: 17-20 in
  • Max Backspacing: 6.00 in
  • Tire Size: 33-35 in

2008-2022 Toyota Sequoia King 2.5 RR Coilovers & Rear Shocks:

King's 2.5 Remote Reservoir Coilovers and rear shocks for the 2008-2022 Toyota Sequoia is a great starting point to improve your Sequoia's suspension performance. These aftermarket coilovers and rear shocks have been factory-tuned by King for optimal ride quality and are 100% bolt-on.

KEY FEATURES:
  • 100% bolt-on performance.
  • King's 2.5 Remote Reservoir Coilovers are designed to increase wheel travel by up to 25% over stock.
  • Adjustable ride height.
  • Large 2.5” shock bodies increase fluid capacity for smoother, cooler running shocks.
  • Tuned for optimal ride quality.
  • Extensive dynamometer lab testing and punishing real world testing to develop the optimal damping curves and spring rates for your Toyota Sequoia
  • Built from the same quality materials and to the same precise tolerances as King’s top of the line Pure Race series shocks.
  • Fully rebuildable, serviceable and tunable.
  • Improved reservoir mounts. No more hose clamps
KING COMPRESSION ADJUSTERS:

King's Wide Range Compression Adjuster that gives 20 precise clicks of compression damping adjustment to further refine your ride quality.

COMPRESSION ADJUSTER FEATURES:
  • King's Wide Range Compression Adjuster that gives 20 precise clicks of compression damping adjustment to further refine your ride quality.
  • External finned reservoirs dramatically increase fluid capacity, heat dissipation and provide sustained damping performance even under the most punishing conditions.
  • Reservoir Mounts that will securely hold your coilover's reservoir.
  • All new threaded end cap design with new Schrader valve protective cap.
  • Made from extruded 6061-T6 aluminum.

Shipping & Returns

SHIPPING POLICY
There is a chance that your cart will display no shipping charges. Certain items populate a standard shipping rate, others are advertised as free shipping to the lower 48, and others (often multiple parts or larger orders) may not show a rate. There is nothing more to do on your end if it is free or flat-rate shipping.

If your order does require a shipping cost/option, our shipping department will determine the shipping charges, and we will email you the cost/options for your order to ship out. Once you receive that email, there will be a link to pay for the charges, or you can cancel the order and be fully refunded.

OFFERS OF FREE SHIPPING:
All free ground shipping offers only apply to shipping addresses in the continental United States. This notification will appear above the product information and on the cart page.

FLAT RATE GROUND SHIPPING:
Some products have a standard ground shipping policy if you require the product faster, please notify us in the notes section during checkout.

If you have special shipping requirements, please contact our sales department. Email us help@sdhqoffroad.com

PROCESSING YOUR ORDER:
If shipping costs need to be calculated/added, you will be emailed with an updated link to your order. Your updated order will include your order's shipping costs and be your original order with the letter "A" at the end. While checking for updates on your order, please add an "A" to the end of your order number, as your order number without the "A" will show canceled since it has been superseded.

FIBERGLASS SHIPPING POLICY:
Our shipping department takes the same time and effort in packaging your products as our engineers do in designing them. However, damage can still occur in shipping. Most of these damaged items can be easily repaired during install and or in paint prep. If this is not the case, the buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and if need be, notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver’s presence. A signed receipt without any notation releases the carrier as well as SDHQ from any further damage claim. Discovery of damages after a clear delivery becomes the responsibility of the customer. The buyer must notify SDHQ of any damages within 24 hours. In cases of damage with proper notion on receipt, the carrier will determine whether to pay for the repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to SDHQ and is not negotiable. All disputes about the settlement amount shall be addressed with the carrier. SDHQ, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.

POWDER COATED ROCK SLIDERS SHIPPING POLICY: While we pack with care, we advise against shipping powder-coated sliders due to the risk of scuffs/scratches during transit. Any shipping-related damage isn't covered by SDHQ.

GOOSE GEAR SHIPPING POLICY: All Goose Gear products are made-to-order. Once your order is placed, it cannot be cancelled or refunded. By checking this box, you acknowledge and agree to these terms. Thank you for understanding the unique nature of our custom manufacturing process.

RETURNS:
Some items may be eligible to be returned if returned as new within 30 days of shipping, with a 20% re-stocking fee. If eligible for return, the return amount will be for store credit. There are NO returns after 30 days from the date of receipt. Freight is nonrefundable. Refunds will be given on parts only and exclude labor or installation charges, shipping, or any other charges. All parts must be returned in the original package, cannot be damaged or installed, and must be in original condition.

For further info on our return policy, please visit the Online order returns page.

Shipping & Returns

SHIPPING POLICY
There is a chance that your cart will display no shipping charges. Certain items populate a standard shipping rate, others are advertised as free shipping to the lower 48, and others (often multiple parts or larger orders) may not show a rate. There is nothing more to do on your end if it is free or flat-rate shipping.

If your order does require a shipping cost/option, our shipping department will determine the shipping charges, and we will email you the cost/options for your order to ship out. Once you receive that email, there will be a link to pay for the charges, or you can cancel the order and be fully refunded.

OFFERS OF FREE SHIPPING:
All free ground shipping offers only apply to shipping addresses in the continental United States. This notification will appear above the product information and on the cart page.

FLAT RATE GROUND SHIPPING:
Some products have a standard ground shipping policy if you require the product faster, please notify us in the notes section during checkout.

If you have special shipping requirements, please contact our sales department. Email us help@sdhqoffroad.com

PROCESSING YOUR ORDER:
If shipping costs need to be calculated/added, you will be emailed with an updated link to your order. Your updated order will include your order's shipping costs and be your original order with the letter "A" at the end. While checking for updates on your order, please add an "A" to the end of your order number, as your order number without the "A" will show canceled since it has been superseded.

FIBERGLASS SHIPPING POLICY:
Our shipping department takes the same time and effort in packaging your products as our engineers do in designing them. However, damage can still occur in shipping. Most of these damaged items can be easily repaired during install and or in paint prep. If this is not the case, the buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and if need be, notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver’s presence. A signed receipt without any notation releases the carrier as well as SDHQ from any further damage claim. Discovery of damages after a clear delivery becomes the responsibility of the customer. The buyer must notify SDHQ of any damages within 24 hours. In cases of damage with proper notion on receipt, the carrier will determine whether to pay for the repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to SDHQ and is not negotiable. All disputes about the settlement amount shall be addressed with the carrier. SDHQ, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.

POWDER COATED ROCK SLIDERS SHIPPING POLICY: While we pack with care, we advise against shipping powder-coated sliders due to the risk of scuffs/scratches during transit. Any shipping-related damage isn't covered by SDHQ.

GOOSE GEAR SHIPPING POLICY: All Goose Gear products are made-to-order. Once your order is placed, it cannot be cancelled or refunded. By checking this box, you acknowledge and agree to these terms. Thank you for understanding the unique nature of our custom manufacturing process.

RETURNS:
Some items may be eligible to be returned if returned as new within 30 days of shipping, with a 20% re-stocking fee. If eligible for return, the return amount will be for store credit. There are NO returns after 30 days from the date of receipt. Freight is nonrefundable. Refunds will be given on parts only and exclude labor or installation charges, shipping, or any other charges. All parts must be returned in the original package, cannot be damaged or installed, and must be in original condition.

For further info on our return policy, please visit the Online order returns page.

Quality

We pride ourselves on offering only top-tier products, handpicked through strategic partnerships with the industry's elite.

When you choose us, you're investing in unparalleled quality and craftsmanship.

Learn more about what 'SDHQ Built' means to us here.

Quality

We pride ourselves on offering only top-tier products, handpicked through strategic partnerships with the industry's elite.

When you choose us, you're investing in unparalleled quality and craftsmanship.

Learn more about what 'SDHQ Built' means to us here.

Secure Payment

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

We accept payments with :
Visa, MasterCard, Shop Pay, PayPal, Apple Pay, Discover and more.

Secure Payment

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

We accept payments with :
Visa, MasterCard, Shop Pay, PayPal, Apple Pay, Discover and more.

find everything you need?

SDHQ Built Products

Discover the robust, American-made range of SDHQ products, where superior quality meets outstanding performance. Crafted at our headquarters, our gear is built to enhance your driving experience.

explore

we may have just the thing you're looking for

A-Pillar Light mounts to fit any light for most models of 4x4 trucks.

A-Pillars

Switch Pro Panels to control all onboard lights and accessories.

Switch Pros

Inexpensive ABS Guards that can save you from expensive repairs.

Abs Guards

American-made Excellence

SDHQ: Built for Adventure

Experience American-made excellence from SDHQ, your fellow off-road enthusiasts. We take pride in crafting high-quality, custom products right at our headquarters for unparalleled performance and durability.

Check out what 'SDHQ Built' means for us as well as our customers:

sdhq built