These are Camburg's 4″ lift spindles for the 2005-Current 2wd Tacoma Prerunners. These are a great solution for larger tires and factory ride or much need clearance for larger tires with our bolt in mid travel coilover or long Travel kits. Factory spindles are known for bending so this new design is much stronger than the factory units giving you strength needed for off road use. These spindles are CNC machined, fully fabricated, with an internally gusseted boxed design, 3/4″ wider per side to correct spindle offset as well as more tire clearance with upper arms. Camburg's new steering arm angle will relieve binding on the factory outer tie rods at droop allowing for more wheel travel.
Camburg offers the spindle in two versions, one that incorporates the factory sway-bar mount for stock length upper & lower arms and our long-travel version that does not have the sway-bar mount, making it stronger. It also comes with an even longer brake line to work with our long-travel kit. The stock brake lines for either version are too short.
- Fully fabricated (not cheap cast imports)
- CNC Machined
- 4in Lift
- 3/4in wider per side
- Includes longer length stainless/kevlar front brake lines
- Clearance for larger tires
- Powder-coated finish
- Fits 6 lug version trucks only
- Driver side spindle
- Passenger side spindle
- Extended length stainless/kevlar front brake lines
- 12pt Hardware Kit