{"product_id":"carli-new-10-13-ram-diesel-carli-backcountry-system","title":"'10-13 Ram Diesel Carli Backcountry System - 3\" Lift","description":"\u003ch6 data-mce-fragment=\"1\"\u003eall-around comfort and ride quality\u003c\/h6\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUtilizing Carli SPEC 2.0″ Diameter, Remote Reservoir shocks, we’ve developed a tune that delivers all-around comfort and ride quality designed for on-road, in-town, highway, towing\/hauling as well as slow to mid-speed off-road use. The remote reservoir Carli SPEC 2.0 boasts 6063 Aluminum construction, anodized body for corrosion resistance, 5\/8″ hardened steel chrome plated shaft, full serviceability \u0026amp; re-buildability and are built with 1-piece bushings in the 6061 billet rod-ends. These shocks are spec’d with a premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation. \u003c\/p\u003e\n\u003ch6 data-mce-fragment=\"1\"\u003especs:\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFront Lift: 3\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRear Lift: 1-2\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFront Travel: 10.5\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRear Travel: 12.3\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShock Diameter: 2.0\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTire Fitment: 37\" x 12.50\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6 data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eadditional kit Details:\u003c\/b\u003e\u003c\/h6\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYour truck will sit 3” higher in the front (year\/cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear is lifted 1”-2” via the customer’s choice of a Progressive Add-A-Pack or Full Progressive Leaf Pack.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Progressive Add-A-Pack replaces the factory overload with a 5-Leaf, progressive pack that changes the final rate of the spring pack keeping the rear planted while increasing traction and predictability.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe optional Full Progressive Leaf Pack replaces the entire factory leaf spring assembly increasing travel and drastically increasing comfort throughout the entire usable travel stroke at the cost of a 15% payload reduction from a standard 2500. This payload reduction can be supplemented back to factory 3500 SRW capacity with the addition of the Long Travel Airbags for the best of both worlds; ride quality and payload capacity\/load control.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen pairing added down-travel with the taller ride height, the position of the factory, front sway bar will need to be altered as well. For this, we offer two options, extended Sway Bar End Links or the replacement Torsion Sway Bar. The End links are equipped with ½” FK Rod-Ends and in-house machined 17-4 stainless bodies that are extended over stock to reset the sway bar engagement points. Factory pillow bushings are re-used to assemble the sway bar to the lengthened link.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCarli’s optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5\/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension (in close competition with the full progressive leaf spring upgrade).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen lifting the front end of a straight-axle truck, the front axle is pulled off-center unless the proper linkages are addressed. Three inches of front lift equates to an axle shifted toward the driver’s side ¾” and back toward the cab ½”. This system includes an Adjustable Track Bar to push the axle back toward the passenger side and provide a stronger link with less deflection for the lifted application. We also recommend the purchase of a set of extended control arms to shift the axle forward to its new center of travel.\u003c\/p\u003e\n\u003ch6 data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eWheel and Tire:\u003c\/b\u003e\u003c\/h6\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis system will fit up to a 37” tire with our High Clearance Control Arms and Full Progressive Leaf Springs on wheels no more than 9” wide with 5.75” of backspacing. If running factory control arms or wheels; we recommend an All Terrain 35” tire. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter. For more details, see our article on wheel and tire selection and tire pressures\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Carli Suspension","offers":[{"title":"Default Title","offer_id":68107853856868,"sku":"CS-D3-BC-CS-10-D","price":2713.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2493\/2184\/files\/CS-D3-BC-10-D-Ram-Backcountry-System-Carli-SPEC.jpg?v=1794339914","url":"https:\/\/sdhqoffroad.com\/products\/carli-new-10-13-ram-diesel-carli-backcountry-system","provider":"SDHQ","version":"1.0","type":"link"}