Elka Suspension

'07-Current Toyota Tundra 2.5 RR Coilover Kit 2-3" Lift

  • VENDOR: Elka Suspension
  • PART#: ELKA-90268
  • YOUR PRICE: Regular price $1,799.99

PRODUCT OVERVIEW:

Elka's 2.5 REMOTE RESERVOIR coilover kit for the 2007-Current Toyota Tundra features an external reservoir with increased oil volume for cooler operating temperature, providing better performance and consistency. These shocks are a good performance upgrade over OEM shocks.

SPECS:

  • Lift Range: 2 in. to 3 in. lift
  • Shock Model: 2.5 RESERVOIR
  • Shock Type: COILOVER
  • Reservoir Configuration: REMOTE
  • Body Diameter / Material: 56mm, ALUM.
  • Extended Length: 25.59 in.
  • Compressed Length: 19.06 in.
  • Stroke: 6.54 in.
  • Spring Rate: 700 lb/in
  • Spring OD / Spring ID: 4.56 in. (116mm) / 3.00 in. (76.2mm)

TECH INFO:

  • This configuration is for use exclusively with aftermarket lift kits or upper control arms to accommodate between 2 in. to 3 in. of lift.
  • Ride height is preset from our factory at approximately 2.5 in. of lift at the front for most setups, actual ride height may vary depending on wheels dimensions and lift kit or upper control arms used.

KEY FEATURES:

  • Firm and stable handling for driving on desert and fire roads (sports car feeling);
  • Plush compliance while off-road driving over washboard;
  • Strong ramping effect for extra bottom-out protection over large dips and washes;
  • Maximum articulation and traction for rock climbing.
  • High-performance off-road capabilities
  • Improved handling and comfort for casual driving
  • Better traction
  • Provides leveling capabilities for better weight distribution
  • Increased protection against bottoming-out

RIDE ENHANCEMENTS:

  • Spring setup optimized for each setup
  • Better attenuation of vibration, leading to major noise reduction in the cabin (much less squeak and rattle)
  • Damping characteristics optimized for each truck and setup, providing a smoother ride
  • Increased comfort in both on road and off-road conditions, especially over washboard and square-edge impacts
  • More stable and more predictable handling
  • Reduced front-end diving when cornering or braking
  • Reduced rear-end bucking and lifting
  • Increased damping and spring rate for better handling when towing or loading truck

TECHNICAL FEATURES:

  • Massive 2.5 in. (56mm) hard-anodized aluminum body for cooler operation
  • Big bore design with less restricted oil flow for increased responsiveness and less fading
  • Internal hydraulic valving optimized for each vehicle platform
  • Built from CNC-machined and forged aluminum parts, aluminum bodies and premium-quality internal components
  • External remote reservoir with low-friction floating piston (1:1 ratio vs. main piston) providing additional cooling
  • DOT high-flow reservoir hose
  • Heavy-duty 3/4 in. (19mm) induction-hardened shaft
  • Triple sealing system with dust wiper, high-pressure step-seal and premium quality o-ring
  • Direct, bolt-on replacement that uses stock shocks location
  • Proprietary ultra-low friction, light viscosity semi-synthetic oil blend, ultra-resistant to high operating temperature