During heavy off-road use, the lower control pivot mounts are subject to damage. They can bend severely enough to knock the truck's alignment out of spec and cause poor handling. In worst case scenarios lower control arm mounts have been completely ripped off of the Raptors. Adding these doubler plates from SDHQ to your lower control arm mounts will significantly increase the strength and reliability of these pivot points. This product is intended to be welded on.
FITMENT NOTE: If you plan on using the SPC alignment cams on your truck, the upgraded 10.9 metric hardware upgrade is required. Stock lower control arm hardware is not long enough and will not reach the locking portion of the nut. Shown With OEM Hardware