Elka Suspension
'07-21 Toyota Tundra Elka 2.5 RR DC Suspension System 2-3" Lift
'07-21 Toyota Tundra Elka 2.5 RR DC Suspension System 2-3" Lift
MCQUEEN
190 South McQueen Road
Suite 109
Gilbert AZ 85233
United States
Elka Suspension's 2.5 DC remote reservoir suspension system with a 2-3" lift allows precise fine-tuning of the high-& low-speed compression damping so you can adapt the suspension for your specific driving style and terrain conditions without compromise. It also features an external reservoir with increased oil volume for cooler operating temperature, providing better performance and consistency.
SPECS:
- Lift Range: 2 in. to 3 in. lift
- Shock Model: 2.5 DC RESERVOIR
- Shock Type: COILOVER (F) + NON-COILOVER (R)
- Reservoir Configuration: REMOTE
- Body Diameter / Material: 56mm, ALUM.
- Extended Length: F 25.59 in. / R 26.08 in.
- Compressed Length: F 19.06 in. / R 16.71 in.
- Stroke: F 6.54 in. / R 9.37 in.
- Spring Rate: F 700 lb/in
- Spring OD / Spring ID: 4.56 in. (116mm) / 3.00 in. (76.2mm)
KEY FEATURES:
- Firm and stable handling for driving on desert and fire roads (sports car feeling);
- Plush compliance while off-road driving over washboard;
- Strong ramping effect for extra bottom-out protection over large dips and washes;
- Maximum articulation and traction for rock climbing.
- Wide range of highly effective compression adjustment
- Precise fine-tuning of high-& low-speed compression, no need to compromise with your settings
- High-performance off-road capabilities
- Improved handling and comfort for casual driving
- Better traction
- Provides leveling capabilities for better weight distribution
- Increased protection against bottoming-out
RIDE ENHANCEMENTS:
- Spring setup optimized for each setup
- Better attenuation of vibration, leading to major noise reduction in the cabin (much less squeak and rattle)
- Damping characteristics optimized for each truck and setup, providing a smoother ride
- Increased comfort in both on road and off-road conditions, especially over washboard and square-edge impacts
- More stable and more predictable handling
- Reduced front-end diving when cornering or braking
- Reduced rear-end bucking and lifting
- Increased damping and spring rate for better handling when towing or loading truck
WHAT'S INCLUDED:
- Two (2) 2.5 DC RESERVOIR Coilover front shocks
- Two (2) 2.5 DC RESERVOIR rear shocks
TECH INFO:
- This configuration is for use exclusively with aftermarket lift kits or upper control arms to accommodate between 2 in. to 3 in. of lift.
- Ride height is preset from our factory at approximately 2.5 in. of lift at the front for most setups, actual ride height may vary depending on wheels dimensions and lift kit or upper control arms used.
HIGH-FLOW DUAL COMPRESSION ADJUSTMENT OVERVIEW:
Elka Suspension’s Dual High- & Low-Speed Compression adjustment is an internal cartridge with two distinct circuits that control the hydraulic resistance for both highvelocity and low-velocity oil displacement. This enables very advanced fine-tuning for different types of impacts that would otherwise require the driver to make a compromise between a more comfortable softer suspension and a high-performance harder suspension.
LOW-SPEED COMPRESSION ADJUSTMENT (LSC):
The low-speed compression adjustment controls low-velocity compression damping (when the shock is compressing slowly). This technology allows the driver to fine-tune the firmness of the suspension to make it firm of soft depending on the driver’s needs according to terrain conditions or for different types of driving.
The easy to use red twisting knob will make the suspension harder when turned clockwise and will make the suspension softer when turned counter-clockwise.
EXAMPLES OF SITUATIONS THAT AFFECT THE LOW-SPEED COMPRESSION
- Front-end diving when cornering and braking
- Rear-end squatting under hard acceleration
- Driving over whoops at moderate speed
- Undulations and elevation changes in the terrain
HIGH-SPEED COMPRESSION ADJUSTMENT (HSC):
The high-speed compression adjustment controls high-velocity compression damping (when the shock is compressing quickly). This technology allows the driver to fine-tune the resistance of the suspension to impacts, allowing to control bottoming-out protection and absorption of vibrations.
The easy to use black twisting knob will make the suspension harder when turned clockwise and will make the suspension softer when turned counterclockwise.
EXAMPLES OF SITUATIONS THAT AFFECT THE LOW-SPEED COMPRESSION
- Landing from jumps
- Harsh or sudden square-edged impacts
- Driving at high-speed over whoops
- Vibration when driving at very high speed over washboard or when driving over choppy terrain and tire tracks
American-made Excellence
SDHQ: Built for Adventure
Experience American-made excellence from SDHQ, your fellow off-road enthusiasts. We take pride in crafting high-quality, custom products right at our headquarters for unparalleled performance and durability.
Check out what 'SDHQ Built' means for us as well as our customers: