Power Tank is currently experiencing extended lead times on select Power Tank colors and sizes.
PowerTank's 15 lb Package A Power Tank is a great entry-level Power Tank system. With 50% more CO2 than a 10 lb Power Tank, a 15 lb Power Tank is built for larger tires, bigger repairs, or longer overland journeys. The Package A includes a mounting bracket and everything you need to air up tires or run air tools.
This Package A system includes everything you need to run air tools with a Super Flex hose and our Power Flow 3 8-ball auto-lock hose coupler, upgradable to our advanced universal safety Super Coupler. Air up tires through a push-on air chuck. It also includes a Super Bracket that makes a great base mount.
REGULAR OPTIONS: You have a choice between a high pressure HP250i regulator with 250 psi max output or an extreme pressure XP400 regulator with 400 psi max output. Which one is right for you depends on what you will be using your Power Tank for. Tire air up speed is determined primarily by flow rate or the cubic feet per minute (CFM) of the gas. The HP250i boasts a 45 cfm flow rate and the XP400 outputs 48 cfm. Not a large difference in tire air up speed between the two. A high-end compressor puts out 5-6 cfm for comparison.
HOSE OPTIONS: 30 ft coiled hose will stretch from where your Power Tank is mounted in the back to the furthest corner of your Four Door Wrangler Unlimited. It is much faster to put away than the straight hose. 30 ft straight hose will reach a bit further without worrying about the coils catching on corners of your vehicle. It is also the preferred hose to use when working with air tools as it does not pull your tools away from you like a coiled hose would. The downside is the extra time it will take you to coil back up when you're done using it. 10 ft hose: Depending on how you use your Power Tank, a 10 ft hose may be the best option. For longer vehicles like full-size pickups or RVs or set ups where you need to remove the Power Tank from its mount before use, the 10 ft hose is the least obtrusive of the three. Pair it with a Safety Series Tire Inflator with an extended hose whip to make airing up a cinch.
COUPLER OPTIONS: Our standard Power Flow 3 Coupler is one of the nicest air tool couplers on the market. While most use 3 or 4 ball bearings to lock your tool, ours uses 8 balls for extra security under high pressures. Full aluminum construction with machined heat fins for better thermal transfer. It fits 1/4" industrial male plugs.
You will notice that no shipping charges are shown during your check out process no matter what method of delivery you choose.
We do this to allow you to receive to lowest shipping cost possible. In an effort to keep the cost of shipping down,
we try to consolidate shipments, and use the most efficient method of shipping, whether it be freight or UPS ground services.
The shipping charges will be determined by our shipping department and you will be notified of the cost. This is the best way for us to give you the lowest cost on shipping your product.
OFFERS OF FREE SHIPPING: All offers of free ground shipping only apply to shipping addresses in the continental United States. This
notification will appear above the product information and on the cart page.
FLAT RATE GROUND SHIPPING:
Some products have a standard ground shipping policy if you require the product faster please notify us in the notes section during checkout
PROCESSING YOUR ORDER:
After the shipping costs have been calculated, you will be sent an email with an updated link to your order. Your updated order will include your order's shipping costs and be your original order with the letter "A" at the end. While checking for updates on your order please add an "A" to the end of your order number, as your order number without the "A" will show canceled since it has been superseded.
FIBERGLASS SHIPPING POLICY:
Our shipping department takes the same time and effort in packaging your products as our engineers do in designing them. However, damage can still occur in shipping. Most of these damaged items can be easily repaired during install and or in paint prep. If this is not the case, the buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and if need be, notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driver’s presence. A signed receipt without any notation releases the carrier as well as SDHQ from any further damage claim. Discovery of damages after a clear delivery becomes the responsibility of the customer.
The buyer must notify SDHQ of any damages within 24 hours. In cases of damage with proper notion on receipt, the carrier will determine whether to pay for the repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to SDHQ and is not negotiable. All disputes about the settlement amount shall be addressed with the carrier. SDHQ, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.
ATTN: STATE OF CALIFORNIA CONSUMERS WARNING: Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or other reproductive harm.Learn More